asperities

英 [æsˈpɛrɪtiz]

美 [əˈspɛrɪtiz]

n.  (尤指语言、态度)粗暴，严厉
asperity的复数

双语例句

• If the gouge layer is thin, contact between asperities on the rock surfaces can occur.
  如果充填物层很薄，两个岩石表面上的凸起物就有可能互相接触。
• Numerical results reveal that the existence of single asperities can lead pressure to change drastically and film thickness to become thin in the vicinity of the asperities.
  结果表明，单粗糙峰造成接触区对应位置油膜压力剧烈变化而膜厚变薄。
• It is noted that there is a thin fluid film between the loaded asperities and the wafer being polished in CMP process, thereby a flow system with nano scale film is formed in.
  在简述化学机械抛光技术的基础上，提出化学机械抛光过程中，受载的粗糙峰和被抛光的晶片表面之间存在一纳米量级的薄流体膜，形成了纳米级薄膜流动系统。
• In this model the rough surface of the contact is idealized as a plane with some asperities. The sticking effect is also considered. The variation of contact resistance with contact force is calculated.
  模型将粗糙的触头表面理想化为多微丘结构，并考虑了表面粘连效应，给出了接触电阻与接触力之间的变化关系。
• Agglomerates of delusterant particles located near the surface of sythetic fibers cause asperities.
  消光剂颗粒集结在合成纤维表面附近，导致表面粗糙。
• But the countries of the continent for a long time desperately struggled against all change, and would have diverted revolution by softening the asperities of absolute government.
  然而大陆各国长期以来拼命反抗一切改革，他们希望通过缓和专制政府的粗暴程度改变革命的方向。
• Based on the interaction of asperities and upper-bound approach a mathematical model for simulation of friction phenomenon between dies and workpiece was proposed.
  本文中以刚性微凸体与可变形微凸体的相互作用模拟金属压力加工过程中模具与工件之间的摩擦过程，并用上限法分析所提出的模型。
• In microscope scale, a rough surface can be regarded as a series of asperities with certain stochastic distributions of asperity height, size and geometry.
  从微观角度来看，粗糙表面可以近似地认为是由一系列高度、大小以及几何形状服从一定分布规律的微型粗糙峰所组成，因此粗糙峰之间的接触问题也就成为研究粗糙表面接触问题的关键。
• The experiments indicated that asperities of roll surface plow and stick to the aluminum strip surface, and lubrication oil film in deformation zone shields surface topography of aluminum strip are the primary reasons of surface damage of cold rolled aluminum strip.
  实验发现：轧辊表面微凸体对铝板表面的犁削与粘结作用，以及变形区内润滑油膜对铝板表面形貌的屏蔽作用是冷轧铝板表面损伤的主要原因。
• Merchant thought that minute asperities existed at the chip-tool interface and the fluid was drawn into the interface by the capillary action of the interlocking network of these surface asperities.
  Merchant认为：在切屑与刀具接触界面上存在微小的粗粒，切削液通过这些表面的微小粗粒组成连锁的网络的毛细管被吸入到切屑与刀具的接触界面上。