deflections

英 [dɪˈflɛkʃənz]

美

n.  (尤指击中某物后)突然转向，偏斜，偏离
deflection的复数

柯林斯词典

• N-VAR 偏斜;偏转
  Thedeflectionof something means making it change direction.
  1. ...the deflection of light as it passes through the slits in the grating.
     光线通过光栅狭缝时的偏转
• (体育运动中球击中某物后的)转向，变向
  In sport, thedeflectionof a ball, kick, or shot is when the ball hits an object and then travels in a different direction.

双语例句

• We may use the plane stress analysis for determining deflections in the midplane of the beam.
  我们可以用平面压力的分析方法来确立梁中间面的挠度。
• Where required, to examine deflections, stiffness requirements, and any special material and design provisions to obviate brittle fracture under adverse conditions.
  必要时验算挠度、刚度要求、以及任一特殊材料和设计规定，以预防不利条件下的脆断。
• The results showed that: both two maximal deflections were at the middle point of end span;
  发现两者最大挠度都发生在受火边跨；
• The effects of some parameters, such as the plate thickness, radius of the filled foundation, on the maximum deflections and stress, are also investigated.
  最后研究了盖层厚度、填充半径对位移、应力的影响规律。
• The deflections of throttle slices were analyzed and the equivalent relations of flux distribution were deduced according to the structure of self-designed hydro-pneumatic spring.
  根据自主研发阻尼可调油气弹簧的结构形式，分析了叠加节流阀片的挠曲变形量，给出系统流量分配的等效关系。
• An increase in resistance to roll deflections may be gained by splitting the single strut into a fork at the top.
  采用上部分呈叉状的单支杆可以增强抗滚转变形性能。
• So the deflections of concrete beams prestressed with bonded FRP tendons are expected to be larger than those of the steel bars cases.
  国内外已有试验研究表明，有粘结预应力FRP筋混凝土梁的破坏模式包括界限破坏、受压破坏与受拉破坏三种。
• But, more significantly, the overturning moment and the shear deflections produced by lateral forces are much larger and must be carefully provided for.
  更重要的是侧向里所产生的倾覆力矩和剪力变形要大的多，必要谨慎设计来保证。
• This renders the bearing like other self-aligning bearings, impervious to misalignments and shaft deflections.
  有这种装置的轴承就像自调整轴承，可以避免误差和轴倾斜。
• The test results showed that the fracture deflections of the composite coatings and the fractal dimensions of the fractured surfaces decreased with increasing the contents of hard phases.
  测量了多相材料复合涂层的断裂挠度和断口表面的分形维数，分析了复合涂层的断裂特征结果表明：随着硬质相增加，复合涂层的断裂挠度和断口表面的分形维数降。