short-circuiting

英 [ˌʃɔːt ˈsɜːkɪtɪŋ]

美 [ˌʃɔːrt ˈsɜːrkɪtɪŋ]

v.  (使)短路; (做事)抄近路，走捷径
short-circuit的现在分词

柯林斯词典

• V-ERG (使)短路
  If an electrical deviceshort-circuitsor if someone or somethingshort-circuitsit, a wrong connection or damaged wire causes electricity to travel along the wrong route and damage the device.
  1. Carbon dust and oil build up in large motors and cause them to short-circuit...
     碳尘和燃油在大发动机里越积越多，造成了发动机短路。
  2. Once inside they short-circuited the electronic security.
     一旦置入，它们就会使电子安全设施短路。
  3. Short-circuitis also a noun.
     
  4. The fire was started by an electrical short-circuit.
     火灾是由电线短路引发的。
• VERB 回避，绕过（某一流程或程序)
  If someone or somethingshort-circuitsa process or system, they avoid long or difficult parts of it and use a quicker, more direct method to achieve their aim.
  1. The approach was intended to short-circuit normal complaints procedures.
     这种方法旨在避开正常的投诉程序。

双语例句

• According to the analysis we can get the result of the welding quality from the current and voltage of the CO_2 gas shield droplet short-circuiting transfer.
  在此基础上，采用本系统对熔滴短路过渡CO2气体保护焊的焊接电流和电压波形进行了实时采集、存储。
• The weld quality under different welding conditions is related to the welding parameters which are inherent electrical parameters in the welding process itself, i.e. welding current, welding voltage, arc sound, short-circuiting frequency and so on.
  不同工艺条件下的焊接质量的好坏，肯定会反映在与焊接过程本身固有的焊接工艺参数上，如焊接电流、焊接电压、电弧声压、熔滴过渡频率等等。
• Multivariate statistical process control for on line monitoring of short-circuiting GMAW
  短路GMAW焊在线质量监测的多变量统计过程控制方法
• Based on the approximate entropy theory and related algorithm, approximate entropy analysis of current in short-circuiting arc welding in CO_2 shielding gas are performed from the point of view of nonlinear time sequences.
  依据近似熵的理论和算法，从非线性角度对纯CO2保护气体条件下短路过渡电弧焊的电流信号进行了近似熵分析。
• Detection and Analysis on the arc energy of short-circuiting co_2 arc welding
  短路过渡CO2焊电弧能量的检测与分析
• Randomicity& stability of short-circuiting droplet transfer in arc welding process
  弧焊短路过渡过程的随机性与稳定性
• Some pharmaceutical companies are experimenting with other types of additives with the aim of short-circuiting bacteria's defenses.
  一些制药公司也在试验其它类型的添加剂，旨在破坏细菌的防御体系。
• Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding.
  短路过渡焊接时，熔滴过渡频率通常被作为评价焊接过程稳定性及焊接质量的重要指标。
• In order to take into account the synthetic influence of all characteristic parameters, by means of the characteristic parameters synthetic value, a quantitative evaluation function is built up to describe and real time evaluate the short-circuiting transfer process of CO2 arc welding.
  为综合考虑这些参数的影响，以特征参数综合值来描述和实时评判CO2焊接短路过渡过程，得到一个能全面定量描述和评判CO2焊接过程的综合评价函数。
• Short-circuiting Effect and the Solution in Gnutella Network
  Gnutella网络中的短路效应及其解决方案