veneering
英 [vəˈnɪərɪŋ]
美 [vəˈnɪrɪŋ]
网络 镶饰; 薄片贴花; 镶面; 薄片贴面
现在分词：veneering
英英释义
noun
- the act of applying veneer
- coating consisting of a thin layer of superior wood glued to a base of inferior wood
双语例句
- By a single factor test and orthogonal test, the paper takes bamboo timber and Taun as base material to study on the clear decorate process of melamine, using 3 different process: painting melamine, veneering melamine impregnated paper, mixing of painting and veneering.
本论文通过单因素试验和正交试验，分别采用涂饰法、浸渍纸贴面法、涂饰与浸渍纸贴面复合法，以竹集成材和番龙眼木材为基材表面的三聚氰胺树脂透明装饰工艺进行了研究。 - Study on the compatibility of yttria-stabilized zirconia framework bonded to the corresponding veneering ceramic
钇稳定氧化锆基底材料与饰面瓷结合性能的实验研究 - Every kinds of veneering are various capacity, you can choose freely.
每种贴面均有大小不同容量，诸君可灵活选购。 - European Federation of the Wood Veneering Industry
欧洲木制品镶饰工业联合会 - AN EXPERIMENT ON INARCHING BY INLAYING A STALK ON ROOT PRUNING STALK OF CUCUMBER Study on Veneering with Two-Solution Adhesives
黄瓜砧木断根靠接法试验研究两液胶薄木饰面工艺初探 - As a small slice cutter for beauty, the table-type hay cutter can cut the fruits and carrots and the like into the slices with the thickness like that of a piece of paper for veneering.
作为美容用的小型切片刀，可切出薄如纸的瓜果片、胡萝卜片等供贴面使用。 - Objective: To evaluate the color change of the two-layer porcelain laminate veneer after adding veneering porcelain of different thickness to the 0. 2 mm thick aluminum oxide.
目的：考察加入不同厚度的饰面瓷在0.2mm氧化铝上双层烤瓷贴面颜色的变化。 - The technique of hot-pressed veneering ceramic was recommended to be used on the surfaces of zirconia and metal core crowns, to reduce the inner defects of veneering ceramics and to improve process efficiency. 3.
临床上氧化锆、金属合金内冠表面可使用热压铸饰瓷工艺，既降低饰瓷材料缺陷，又提高饰瓷工艺效率。 - In this study, using an all-ceramic core material ( MIC), we investigate the change of strength caused by sandblast under different grain size, pressure and time. We also research the strength change of MIC sintering with its veneering porcelain that has been sandblasted before.
本研究选用全瓷修复底层材料（MIC），通过改变喷砂的粒度、压力和时间，研究喷砂对其强度的影响，并对喷砂后的试件进行饰面瓷烧结，测量其强度的改变。 - Objective To investigate the interface bond strength and compatibility between High-Strength Dental Ceramic ( type A) and Vintage AL veneering porcelain.
目的考察高强度牙科陶瓷（A型）与松风VintageAL饰面瓷之间的界面结合及匹配性，为其临床应用奠定基础。